CV单一循环分配器
- 1. CV type progressive feeders have Taiwanese Patent No. 182121, Chinese Patent No. ZL 03222941.0.
- Fixed amount of oil feeding. The lubrication points of volume distributor supply a fixed flow of lubricant. The discharge volume of each outlet is 0.18 cc/stroke.
- Every piston of CV type progressive feeders cannot deliver its lubricant until the preceding one has discharged it.
- If one feeder section doesn't receive any lubricant or is blocked, the entire CV type progressive feeder will stop, and that situation can be noticed by the signal of the feeder.
- The standards are assembled detective piston, which can be seen if operation is normal.
- CV type could be assembled NO (Normal Open) or NC (Normal Close) sensor switch on request, which would make symbol during operation or intermittent time, it's easier to observe.
- CV type can be used with grease or oil lubricators. As ordering, please details used for oil or grease.
- When using grease, the operation pressure range is 15 kgf/cm2 to 150 kgf/cm2. When using oil, the operation pressure range is 5 kgf/cm2 to 30 kgf/cm2.
- The viscosity range of grease is No. 0 to 2. And the viscosity range of oil is 32-220 cSt @ 40℃.
